Critique: Schuttenworks’ Ripple is the Best Apple Watch Dock for Nightstand Style

With watchOS 2, Apple released a brand new attribute called Night-Stand mode, which allows the Apple Watch be put to use as morning alarm clock and a night-time clock when it’s connected to the charger. Nightstand mode only operates while the Apple Watch is set on its aspect in landscape mode, leaving lots of early Apple Watch stands and docks less of use.

moving forward, accessory manufacturers will probably focus on creating products which operate using the newest Nightstand attribute, but little Apple Watch dock manufacturer Schuttenworks has developed an easy, top quality watchOS 2-appropriate Apple Watch charging stand known as the Ripple.

I’ve been utilizing the Ripple on my night table for a number of weeks now, and I ‘ve nothing but great things to say about it. It’s a stylish, low profile stand that works with all Apple Watch versions and all groups, both open and closed -loop, and at $54, it’s perhaps not a value that is negative.

Like its forerunner the Wave, which we reviewed earlier in 2013, the Ripple works on the smart split layout and magnet program to lock the Apple Watch charger set up and keep the cord out-of-sight.

The Ripple comes in two bits, which snap-together utilizing two wood pegs and two sets of magnets. Set Up includes fitting the charger in the cut-out at the very best, pulling both pieces aside, routing the cable through the cable cut-out, and snapping both pieces back together again.

The two halves of the Ripple are completely machined and fit together flush using a virtually invisible seam, therefore it looks like one piece of wood that’s been developed around the Apple Watch charging cable. The Apple Watch charger also remains securely in position, thanks to micro suction tape that rests in the wood cut-out of the Ripple.

Several Apple Watch stands on the marketplace possess a big base for balance, but the Ripple doesn’t. On the contrary, it uses the exact same suction tape that holds the charger set up to maintain it securely stuck to your desk or other area that is flat. Through the testing procedure, the micro cassette did, and I ‘ve a painted desk which I kept it on no harm to my desk, and with all the Ripple didn the micro cassette ’t change approximately at all. It’s an extremely set up that is tough and that I valued this stand requires on my night table to the bit of room.

The Ripple comes in two types, one for the Apple Watch Sport and one for the metal Apple Watch and Apple Watch Edition. The cause of this is as the watches send with that is various -sized chargers. An Apple Watch Sport stand also can work with an additional part of the micro suction tape using a metal Apple Watch, and the edition I ‘d let my metal Apple Watch charger sit at only the correct height to use my Apple Watch.

When assembled, the Apple Watch sits lengthwise on the little ledge of the Ripple and is held in place by the magnet in the Apple Watch charger. The Ripple seems finest with a group rsquo & that;s closed, but nonetheless, it also works with the open group like an Apple Watch Sport group that is unlooped. Because the Apple Watch merely rests on the ledge of the stand, the Ripple is suitable for all Apple Watch bands, in the significant closedloop Link Bracelet to the open-loop Apple Watch Sport group.

Since the Apple Watch sits in landscape mode on the Ripple, watchOS 2’s Night-Stand style is completely operational. It allows the alarm-clock function of the device glow together with the Ripple attracting little awareness of the Apple Watch. It seems amazing on a night table and it’s not difficult to study, but the Ripple is a brief stand. Many people might choose something a small taller, but also for me, it was right at eye-level and easy get and to find out in the nighttime.

All of the Schuttenworks stands are made in small batches in Portland, Oregon, and sharpening and sanding is completed by hand. I’ve had hands on time with two Schuttenworks both have been well-made, and stands with no defects to be viewed.

Bottom Line

The Ripple’s small-footprint, straightforward layout, and compatibility with all watchOS 2 characteristics make it one of the better I’ve employed stand. Its wood layout might not appeal to consumers who favor stands made from a different substance or aluminium, but also the Ripple is an excellent option for consumers seeking a pier using a a vintage, unobtrusive appearance.

I’ve located the Ripple to be a perfect Apple Watch stand for traveling. It’s light and compact enough that it doesn’t take up much space in a bag or travel bag, and it’s a finer option than utilizing the Apple Watch charger alone when far from home.

At $54, it’s higher priced than a few of the more affordable Apple Watch stands on the marketplace, but it’s similar in value to the greater-quality stands from firms like A Dozen South and Mophie, and its own build quality makes it well worth the premium expense.

I ‘d few complaints concerning the Ripple and that I don’t wait to suggest it to anybody who locates the esthetic appealing.


  • Simple but appealing layout
  • Harmonious with Night-Stand mode
  • Small footprint
  • Smart cable-concealing building


  • On the pricey side
  • Wood may not appeal to all preferences

How you can Purchase

The Ripple may be bought from the Schuttenworks site for $54. It’s not incompatible with both the Apple Watch Sport and the stainless steel Apple Watch, and it comes in Cherry, Mahogany, and Walnut woods.

Note: MacRumors received no recompense for this particular critique.

You can follow on Twitter, add us to your circle on Google+ or like our Facebook page to keep yourself updated on all the latest from Apple and the Web.