After months of effort and constant improvement, OSX 10.11 El Capitan is eventually out as a free of charge update via the Mac App Store. If you’re goal will be to migrate seamlessly across from a current version of OSX you then undergo the El Capitan setup procedure and can just go to the Mac App Store. But if you’re searching for a completely refreshing clean install of rsquo & Apple;s newest desktop OS in your Mac, then you’ll need to make a usb-drive that is bootable for El Capitan. We’re heading to show you just the best way to do this.
There really are several prerequisites which are needed to finish the procedure before we leap right to the procedure.
- Any pc running OS X.
- A USB flash-drive using a minimum of 8GB capability. Recall this drive will likely be formatted within the method, therefore if it now has anything significant saved on it afterward you’ll have to create a duplicate of that in a place that is secure.
- Eventually, you’ll want about 15-20 minutes of free time and a little patience.
The best way to create a OSX El Capitan 10.11 bootable USB thumb drive:
Step 1: First up, get OSX El Capitan from the Mac App Store: Obtain OSX El Capitan 10.11 Last Variant For Your Mac Free Right Now. When the download has completed, ensure that you you stop the installer rather than really going through the procedure of updating over the best of your present OS X setup. Ensure the installer that downloads the El Capitan file can be found in the /Programs folder below the title ‘Install OSX El Capitan.app‘.
Step 2: Next, we’re heading to have to format the USB thumb drive to get it in to a state where it could take the payload for installing El Capitan. Plug the USB thumb drive into an available USB port and launch the ‘Disk Utility‘ application. Ensure the USB thumb drive is chosen inside the left side-bar, and then choose the ‘Erase‘ tablature in the primary window interface.
Step 3: In the primary window make sure the ‘Format‘ drop-down box is placed to ‘Macos Extended (journaled)’, and the ‘Title‘ is set-to ‘Untitled‘. Select the ‘Erase‘ button at the underside of the interface.
Step 4: Now, in an identical window choose the ‘Partition‘ tablature. From within the ‘Partition Lay-Out‘ drop-down, ensure that ‘1 Partition‘ is chosen. Click the ‘Choices‘ button at the underside of the window and ensure that ‘GUID Partition Table‘ is picked as the preferred partition scheme. Check the title of the partition and explain that it’s place to & Untitled lsquo ’ and maybe not ‘Untitled 1′ or something.
Step 5: This is where things get a bit interesting. We’re heading to dive in to some commandline foo. Start the Final application. Sort in the next command and hit ‘Input‘.
sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia –volume /Volumes/Untitled –applicationpath /Applications/Install OS X El Capitan.app –nointeraction
Final will request that you put in your administrator password for the Apple Macintosh, due to the leading ‘sudo’ command. Kind it and hit ‘Enter‘ to the keypad.
Step 6: Final and the Apple Macintosh will now start going through the procedure for installing the OSX El Capitan installer onto the USB thumb drive that is linked and then turn it right into a bootable drive. As stated above in the ‘ rsquo Requirements&; area, this might take about 15-20 minutes to finish. Please DON’T take away the memory stick through the procedure. When the procedure is total, Final will reveal ‘Completed‘.
And you’re-done! The recently created OS-X El Capitan bootable thumb drive is able to be set to function to put in fresh copy of El Capitan on your Apple.