You might think, when getting a new mobile device, that your version is the specific same as every single various other individual which decided for the exact same colour and also storage arrangement. This isn’t really always the instance, however, and also in the circumstances of the iPhone 6′′ s memory, some are packed with multi-layer cell (MLC) while others have Tender Loving Care, or three-layer cell flash. If you’re jailbroken, you could learn which kind of memory your device consists of, and sinced MLC is especially much more favorable compared to TLC offered its quicker read/ write rates as well as a lot more expensive nature, you’ll most likely wish to check the quick guide here as well as (ideally) verify that you have actually been blessed with MLC.
Apple just briefly messed around with TLC before switching back to MLC on a long-term basis, so it’s a lot more likely than not that your iPhone 6 or iPhone 6 Plus includes multi-layer cell NAND flash. But if you possess either a 64GB or 128GB iPhone 6/ 6 Plus – – entry-level configuration is obviously unaffected – – then the guide below will reveal you the best ways to figure out one way or the various other.
At this factor you must be assuming; why is it important to learn which NAND memory my iPhone 6/ 6 Plus has? The solution is basic; MLC is more trusted compared to TLC, and also doesn’t create much issues than the previous, where users are stating that their devices are stuck in a bootloop. The problem is tied to the device utilizing TLC memory, as opposed to MLC, and mostly influences those with 64GB and 128GB ability devices. So, if your device is breaking down, or showing indicators of roguishness ahead, then it’s probably associated with the sort of memory you’re using.
Here’s ways to figure out which NAND memory your iPhone 6/ 6 Plus has.
- An iPhone 6 or iPhone 6 Plus at hand
- PC or Mac connected to the same Wi-Fi hotspot as your handset
Step 1: Provided that you’re jailbroken (details at the foot of this post if you’re not), head over to Cydia and search / install both “OpenSSH” and “IOKit Tools”.
Step 2: Next, you’ll be making the preparations on your PC or Mac to SSH into your device. To do this, either open up Terminal in OS X, or, if you’re running Windows, download a similarly-functioning alternative app like PuTTY.
Step 3: On your iPhone 6 / 6 Plus device, open up Settings, tap on Wi-Fi, and then the “i” button next to your connection. From there, make a note of the IP address.
Step 4: In Terminal / PuTTY type in the following:
ssh root@[IP ADDRESS]
replacing the “[IP ADDRESS]” with the actual IP address you noted in Step 3. Then tap on Enter.
Step 5: If you’re met with a pop-up, type in “YES“, and when prompted for a password, the iOS default is always “alpine“. If you’ve changed your root password at any point – which isn’t exactly the worst idea if you’re a jailbreaker – then key in those credentials instead.
Step 6: Paste the following into the Terminal / PuTTY:
ioreg -lw0|grep “Device Characteristics”
After which you’ll be met with quite a lot of data.
Step 7: Within the data, you’ll be looking for “default-bits-per-cell“, which is succeeded by a value. If said value is 2, then you’re good, and running on MLC. But if, by some chalk, your value is 3, then this means you’re running the slightly less able TLC NAND flash.
Have a look at the video below for a more aesthetic tutorial:
Ultimately, it’s not the end of the world, and a person making use of an iPhone 6/ 6 Plus on Tender Loving Care is extremely unlikely to experience any type of significant distinctions versus somebody else on MLC. With that claimed, MLC is certainly the much better of the two in terms of performance, and also if you are stuck on three-layer cell, then you’re most likely validated in feeling a wee little bit difficult done-by.
For tutorials on how you can jailbreak and also install Cydia: